Main mechanism and operation method of automatic desktop labeling machine


desktop labeling machine:https://www.beiltmachinery.com/Round-bottle-desktop-labeling-machine.html

.

This article will introduce the main structure and operation method of the desktop labeling machine to you, help you get a preliminary understanding of the desktop labeling machine, and let you use the desktop labeling machine better,see with BEILT.

Introduction of automatic desktop labeling machine

The automatic desktop labeling machine can be applied to the upper desktop labeling of many types of products, such as carton, file bag, folder, cardboard, book labeling and so on. Adding and using different labeling mechanisms can also be used to label the upper surface of some products that tend to be flat. The overall operation process is as follows:

First, the products to be labelled are put in and supplied by means of manual work, a card dividing machine or a connecting assembly line. The guided product is driven by the conveyor belt and passes through the sensor. After receiving the signal, the sensor of the automatic desktop labeling machine transmits the information to the program memory. After the memory receives the signal, it will output the signal to control the header to send out the label, which realizes the labeling function of the automatic desktop labeling machine. After sticking to the label, the product will complete the labeling through the labeling mechanism. At this time, the entire labeling process is over, and the labelled products can be collected.

The main mechanism of the automatic desktop labeling machine:

1. The header adjustment seat can adjust the X-axis, Y-axis, Z-axis and R-axis direction of the automatic desktop labeling machine.

2. The header, which includes the automatic desktop labeling machine unwinding mechanism, roller mechanism, peeling mechanism, receiving mechanism, traction mechanism and traction motor.

3. The conveyor belt is used to drive the products to be labelled by the automatic desktop labeling machine into the labeling area and send the finished products out of the labeling area.

4. The conveying guide bar is used for the positive effect of the product conveying operation.

5. Touch screen, man-machine interface, used to control the start and stop state of the automatic desktop labeling machine, change the debugging parameters, observe the I/O monitoring and so on.

6. Control electric box, used for circuit arrangement of automatic desktop labeling machine.

desktop labeling machine

Adjustment method of automatic desktop labeling machine:

1. The installation of the label must be in place. When the automatic desktop labeling machine wraps the label, try to wrap it as neatly as possible. It is easier to break the label if it is crooked. After the label is installed, fix the position with the limit ring.

2. Adjust the conveying guide bar according to the width of the product to be labelled, and leave a gap of 1mm between the two guide bars of the automatic desktop labeling machine and the product. However, general paper card products use unilateral guide bars, so it is only necessary to adjust the two ends of the conveying guide bars to be relatively flat.

3. According to the height (thickness) of the product, adjust the position of the Z-axis direction of the label head of the automatic flat labeling machine, so that the peeled label can be attached to the surface of the product in time when the label roll of the automatic flat labeling machine is pulled. Generally, the header of cardboard is adjusted to the height where the peeling plate basically touches the surface of the product. For thicker products, such as boxes and books, the header should be adjusted to a height of 1-2mm between the peeling plate and the surface of the product. After the adjustment is completed, lock the Z-axis direction.

4. Adjust the measuring electric eye of the automatic desktop labeling machine. Tear off a label that is about to enter the area of the target measuring sensor, long press the button on the target measuring sensor of the automatic desktop labeling machine to enter the setting state, and manually pull the label roll in the manual interface of the touch screen, so that the backing paper of the label is torn off. After the automatic desktop labeling machine has completely measured the sensor area of the target sensor, press the button on the target sensor again to confirm the completion of the setting. If the optical fiber sensor is used for the measurement of the target, the preset value of the output signal on the amplifier is set according to the different signal numbers taken by the label on the label roll and the backing paper of the automatic desktop labeling machine.

64 الآراء